Petersen Aluminum Corporation
 Elk Grove Village, IL Annapolis Junction, MD Tyler, TX Kennesaw, GA    Fridley, MN
Phone: 800-PAC-CLAD    info@pac-clad.com

  • Denotes available from stock. * Indicates low gloss/low sheen formulation.  
Steel
  
Aluminum
  PAC-CLAD Cool Colors  
Reflectivity
Emissivity
3 Yr Exposure
SRI*
24 ga.
22 ga.
.032
.040
.050

.063
  Almond  
0.56
0.89
0.57
66
•
•
•
•
  Bone White  
0.73
0.89
0.71
89
•
•
•
•
•
•
  Cardinal Red  
0.37
0.89
0.38
41
•
•
•
 

Charcoal

  
0.28
0.89
29
•
•
•
  Colonial Red  
0.32
0.89
34
•
•
•
•
  Dark Bronze  
0.25
0.89
25
•
•
•
•
•
•
  Evergreen  
0.26
0.88
26
•
•
  Granite  
0.36
0.89
0.35
40
•*
•*
•*
•*
•*
  Hemlock Green  
0.30
0.90
32
•
•
•
•
  Hunter Green  
0.26
0.88
26
•
•
  Mansard Brown  
0.25
0.88
25
•
•
•
•
•
  Medium Bronze  
0.27
0.90
28
•
•
•
•
•
•
  Military Blue  
0.34
0.88
36
•
•
  Musket Gray  
0.31
0.89
33
•
•
•
•
  Patina Green  
0.34
0.89
37
•
•
  Sandstone  
0.53
0.89
0.49
62
•
•
•
•
•
•
  Sierra Tan  
0.36
0.89
0.35
40
•
•
•
•
•
  Slate Blue  
0.26
0.87
26
•
•
  Slate Gray  
0.36
0.89
40
•
•
•
•
•
  Stone White  
0.64
0.88
0.59
77
•
•
•
•
•
•
  Teal  
0.30
0.88
31
•
•
  Terra Cotta  
0.36
0.89
0.37
40
•
•
•
  Matte Black**  
0.25
0.85
23
•
•
•
•
•
  PAC-CLAD Metallic  
  Aged Copper  
0.28
0.89
29
•
•
•
  Champagne  
0.41
0.80
0.40
43
•
•
•
  Copper Penny  
0.49
0.87
0.47
56
•
•
•
  Silver  
0.60
0.83
0.55
70
•
•
•
•
  Weathered Zinc  
0.30
0.81
28
•
•
•
  Zinc  
0.32
0.89
0.31
34
•
•
•
  PAC-CLAD Standard Colors (do not meet cool roof requirements)
  Arcadia Green
•
•
  Award Blue
•
•
•
  Berkshire Blue
•*
  Burgundy
•
•
•
  Forest Green
•
•
•
•
•
  Hartford Green
•
•
•
•
  Interstate Blue
•
•
•
  PAC-CLAD® Metalic finishes are available from stock at a moderate extra cost. PAC-CLAD® Copper Penny is a Non-Weathering Finish.
*Solar Reflectance Index calculated according to ASTM E-1980. **Matte Black (SRI Color) in steel only.

Energystar® Performance Criteria
Emissivity uses ASTM C1371/E408. Reflectivity uses ASTM E903/C1549.
Installation
PAC-CLAD® can be cut, formed, nailed, screwed, or riveted using hand or power tools. Fabricate and install in accordance with drawings and normal sheet metal practices using hand or power tools. Keep cutting edges sharp, clean, and properly aligned. Exercise care during fabrication and installation to avoid damage.
Maintenance
Maintenance is not required. This finish is a member of the Teflon® family, and is self-cleaning. If cleaning is desired, it can be washed with a mild soap and water followed by a clean-water rinse.
Samples
These color reproductions are as accurate as modern printing technology will permit. Free material samples are available on request.

   Textures
PAC-CLAD® is available with a smooth texture or a standard E-5 stucco embossed pattern, available at extra cost.
*Low Gloss/Low Sheen
This finish is a full Kynar 500®/Hylar 5000® finish, but is formulated in a low gloss/low sheen in order to minimize the appearance of oil-canning.
Technical Data for Kynar 500®/Hylar 5000® Coating
•Life Expectancy—20 years exposure – Chalk: rating of 8 or better. Color: 5³E (Hunter Units) change.
•Accelerated Weathering—(ASTM G-23 Type EH) 5,000 hours - Chalk: rating of 8 or better. Color: 5³E (Hunter Units) color change.
•Humidity Resistance—(ASTM 2247) 2,000 hours - No change in pencil hardness.
•Salt Spray Resistance—(ASTM B 117) – 2,000 hours for Aluminum, creepage at scribe 1/32”, no blisters. 2,000 hours for hot dipped Galvanized, creepage at scribe 1/8”, few #8 blisters.		   •Chemical/Acid Pollution Resistance—(ASTM D 1808) – Pass.
•Solvent Resistance—(NCCA procedure 11-18, no comparable ASTM test) – Pass.
•Formability—(ASTM D 3281 and ASTM D 1737) – Can be formed without film fracture using normal metal shop practices to a 1 to 2-T bend radius
•Hardness—(ASTM D 3363) – ŽF pencil hardness.
•Gloss—30 ± 5 at 60º (low gloss/sheen available).
•Abrasion Resistance—(ASTM D 968) - Coefficient of 65 ± 10.
•Adhesion—(ASTM D 3359 and NCCA procedure No. 11-5) – Pass.
•Impact Resistance—(ASTM D 2794 and NCCA Technical Bulletin No. 11-6) – 70 inch/lbs., no tape
pick-off.
Recycled Content
•PAC-CLAD Aluminum - 91%
•PAC-CLAD Steel - 28 to 35%
Kynar 500® or Hylar 5000®
pre-finished galvanized steel and aluminum for roofing, curtainwall and storefront applications.