Standard on-center dimensions are 11”, 18" and 19", but for renovation projects or additions, on-center dimensions may be custom matched to your requirements. Neoprene panel closures are available for installation at the eave.
UL 90 Classified
Steel PAC-CLAD Integral Panels carry a UL 90 Classification for wind uplift when fastened to an underlayment assembly including 5/8” plywood or OSB laminated to rigid insulation. (UL Construction No. 346 & 347) For further details contact Petersen Aluminum Corp.
Air and Water Infiltration
Petersen Integral Panels meet the full performance requirements of the ASTM E 283 air infiltration test and the ASTM E 331 water penetration test when applied over a solid substrate. For complete test results, contact Petersen Aluminum Corporation.
Materials
a) 24 ga. G-90 hot-dipped galvanized steel
b) .032 3105-H14 aluminum or equal
Fasteners
For roofing applications, use Petersen non-penetrating clips. Clips shall be 606l-T6 extruded aluminum, fastened on 18" centers. Use wood-type screws in fastening clips. For fascia and mansard applications, panels should be positively fastened to the substrate.
Trim
All flashing and trim will be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032-.080 gauge as specified) or PAC-CLAD 24 ga. steel. A 20 year warranty shall be supplied covering finish performance.
Installation
Roofing Applications: PAC-CLAD Integral Seam Panels shall be installed over solid decking (5/8" plywood, nailboard insulation or equal) with an underlayment of 30# (min.) roofing felt applied horizontally from eave to ridge. Panels shall be fastened using Petersen non-penetrating clips, fastened on 18" centers (max.). Minimum slope at 3:12 pitch. Consult a local architect/engineer for requirements of local codes and conditions.
| • | Herr-Voss corrective leveled |
| • | Labor-saving one-piece design |
| • | Stiffener beads available |
| MATERIAL | |
| • | 42 standard colors (steel) |
| • | 37 standard colors (aluminum) |
| • | Smooth and stucco embossed available |
| • | 20 year non-pro rated finish warranty |
| • | Galvalume Plus available |
| UL CLASSIFICATION |
|
| • | UL-580 Class 90 rated over solid substratrate (steel only) |
| • | UL-790 Class A fire rated |
| • | UL-263 fire resist ance rated |
| • | UL-2218 impact resistance rated |
| • | Wind load testing results available |
| ASTM TESTS | |
| • | ASTM E283 tested |
| • | ASTM E331 tested |