- Continuous interlock
- Labor-saving one-piece design
- Striations and pencil ribs available
- Maximum panel length 25'-0" long
- No clips required
- 37 stocked colors (24 ga. steel)
- 13 stocked colors (22 ga. steel)
- 36 stocked colors (.032 aluminum)
- 18 stocked colors (.040 aluminum)
- Smooth and stucco embossed available
- Galvalume Plus available
Edge-Loc Metal Roofing Panel is an economical, innovative addition to the PAC metal roofing line. Edge-Loc panels feature a 1 1/2″ leg height and a continuous interlock for improved performance. These panels require no clips. Edge-Loc panels can be an economical panel solution that meets a variety of roofing design requirements.
Trim
All flashing and trim will be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032-.063 gauge as specified) or PAC-CLAD steel (24ga or 22ga. as specified). A 20-year, non-prorated finish warranty can be supplied covering finish performance.
Installation
Edge-Loc can be used in a variety of applications to accommodate several building designs. Edge-Loc metal roofing panels have an integral interlocking system by design, meaning the panels install in one direction. Edge-Loc has a continuous fastening edge that is easily installed using standard screws. Consult with a local architect/engineer for compliance with local codes and conditions. Edge-Loc requires no clips. Please contact Petersen for detail assistance on projects requiring longer panel lengths.
Specs:
10″, 16″ or 18″ O.C.
1-1/2″ high