- 20 year non-prorated finish warranty
- Available with striations or striations with pencil ribs. Available in 3 variations - see profile drawing to right. Check local factory for panel condition availability
- Corrective leveled
- Maximum panel length of 64' - check local factory for longer lengths
- 37 stocked metal colors (24 gauge steel)
- 13 stocked metal colors (22 gauge steel)
- 36 stocked metal colors (.032 aluminum)
- 20 stocked metal colors (.040 aluminum)
- Galvalume Plus available
Tite-Loc HS Metal Roofing Panels combine structural metal panel performance with architectural roofing panel aesthetics. Tite-Loc HS Panels are corrective leveled to provide superior panel flatness. A factory-applied sealant bead is applied for additional weather resistance. Maximum panel length is 64 feet and minimum panel length is 4 feet. Please consult the factory for longer lengths.
Tite-Loc HS Roofing Panels feature a 2″ leg height that requires mechanical field seaming after installation. Panels have a concealed-fastener floating clip system designed to allow for thermal expansion/contraction. For further details, please contact PAC.
Trim
All flashing and trim shall be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032 – .063 gauge as specified) or PAC-CLAD steel (24 gauge or 22 gauge as specified). A 20-year non-pro-rated finish warranty can be supplied covering finish performance. Vinyl masking is recommended on all fabrication applications where extra handling is expected. NOTE: The strippable film must be removed immediately after installation.
Installation
Tite-Loc HS Roofing Panels are intended for use in architectural and structural roofing. Substrates may include 5/8″ (min.) plywood, nailboard insulation or equal with an underlayment of ice and water shield or 30# (min.) roofing felt applied horizontally from eave to ridge. Other substrates may include metal decking, purlins or rigid insulation in conjunction with bearing plates.
A minimum 1/2:12 pitch is required. Contact Petersen for further detail assistance on projects. For Coastal applications, aluminum panels along with stainless steel clips must be used for warranty. Consult a local architect/engineer for compliance with local codes and conditions.
Note: Tite-Loc HS is not available at all Petersen facilities. Check with local factory for availability.


