The system features a built-in sealing mechanism incorporated into the splice plate (see illustration). This proprietary feature not only adds rigidity, but insures a weathertight joint. Proper installation requires that the hold-down cleat be attached with four top fasteners and two face fasteners, spaced as shown. Pac-Clad TITE-LOC coping may be specified with either a neoprene compression pad or a metal compression strip.
| Wind Uplift | |||
MATERIAL |
WALL WIDTH |
FACTORY MUTUAL I-60 |
FACTORY MUTUAL I-90 |
24 ga. Steel |
6"-12" |
• |
• |
22 ga. Steel |
6"-12" |
• |
• |
.050 Alum. |
6"-16" |
• |
• |
.063 Alum. |
6"-16" |
• |
• |
.080 Alum. |
6"-16" |
• |
• |
.125 Alum. |
6"-16" |
• |
• |
| I-60 = 418 lbs. of upward pressure I-90 = 628 lbs. of upward pressure *Call for test results and hold down cleat spacing. |
|||
- Product Features
- Materials
- Available for wall sizes 6"-16"
- FACTORY MUTUAL TESTED
(see cleat diagram & wind uplift chart).
- Made 3/4" larger than the wall to
compensate for membranes
and inconsistencies
- 37 stocked colors (24 ga. steel)
- 13 stocked colors (22 ga. steel)
- 36 stocked colors (.032 aluminum)
- 18 stocked colors (.040 aluminum)
- 28 stocked colors (.050 aluminum)
- 6 stocked colors (.063 aluminum)
- Galvalume Plus available
