Metal Roofing

Flush & Reveal Soffit

preload preload preload preload preload preload preload
Fuji Film

Hanover Park, IL

Fuji Film - Fuji Film -
Florida Welcome Center

Jennings, FL

Florida Welcome Center - Florida Welcome Center -
Bolton & Menk, Inc.

Mankato, MN

Bolton & Menk, Inc. - Bolton & Menk, Inc. -
Northwoods School

Northwoods School - Northwoods School -
  • 2 profiles available
  • Perforation available for ventilation on aluminum only
  • Corrective leveled for superior flatness
  • Maximum panel length of 25 feet
  • 20 year non-prorated finish warranty
  • Rounded interlock leg provides improved flush fit
  • Available with up to 2 stiffener beads
  • 37 stocked colors (24 ga. steel)
  • 13 stocked colors (22 ga. steel)
  • 36 stocked colors (.032 aluminum)
  • 18 stocked colors (.040 aluminum)
  • Galvalume Plus available

PAC-CLAD Flush Panels are designed for wall, fascia and soffit applications where a flush or flat appearance is desired. A rounded interlock leg and concealed fastening system improves the flush appearance while providing additional strength. Panels are factory-formed to length to minimize field cutting. Maximum panel length is 25 feet and minimum panel length is 4 feet.

 

PAC-CLAD Flush Panels are available in on-center dimensions designed to complement our roofing panel product line. Flush Panels are available in two configurations: Flush Panel and Reveal Panel.

 

Applications

Uses: PAC-CLAD Flush Panels are intended for use in vertical wall, fascia and soffit applications. Flush Panels are not intended for use in roofing or mansard applications.

 

Stiffening Beads

The Flush Panel and Reveal Panel are available with optional stiffening beads. Stiffening beads are recommended for longer panel lengths. One or two beads are available.

 

Corrective Leveling

Petersen Flush Panels are formed on precision roll-forming equipment that includes in-line Herr-Voss corrective levelers. Corrective leveling works to remove typical metal conditions including coil set, crowning and edge wave. In-line leveling capabilities allow us to work with source material that is “still-water” flat. The result is a panel that exhibits superior flatness. Corrective leveling is available at no extra charge.

 

Flush Venting

The Flush Panels in aluminum are available ventilated. Consult the local factory for venting options.

 

Soffit “J” Channel

Petersen Aluminum can provide Soffit “J” Channel as trim to match any of our soffit panels. “J” Channel is available in lengths up to 12 feet in matching colors.