Corrugated Panels Showcase High-Tech Toll Plaza

click to enlarge

click to enlarge

The new Sunrise Mainline Toll Plaza on the Sawgrass Expressway west of Ft. Lauderdale represents a transformation of the aging Expressway to a “highway of tomorrow.”  The $26 million design/build project offers the first open road tolling (ORT) in South Florida, using a double-span signature gantry for collection of tolls from high-speed vehicles.

The toll plaza utilizes approximately 11,000 sq. ft. of PAC-CLAD .032” corrugated aluminum panels.  The 7/8” panels were finished in Silver Metallic.  In addition, 5,400 sq. ft. of .125 plate aluminum was custom perforated and spray coated.

Miami-based MCM Corp. was the lead contractor and Orlando-based RS&H was the lead design firm and engineer of record.  “The assignment from the Florida Turnpike Enterprise was to create a ‘showcase toll plaza’,” according to Jesse Forst, project manager for RS&H. The Sawgrass Expressway has become a major commuter corridor with more than 90,000 vehicles per day.  The toll plaza project included 1.33 miles of roadway widening north and south of the plaza and complete reconstruction of the approaches. According to Forst, “The use of corrugated metal was part of the design/build criteria established by the Turnpike.  We designed the project to have a contrasting look between the corrugated and the perforated material.  The installation challenges involved detailing to make sure the two materials meshed together properly without creating maintenance or constructability problems.  It’s a great project and a definite toll road showcase in south Florida.” Allied Architectural Metals, Inc., Ft. Lauderdale, fabricated the custom perforated material as well as installed the corrugated panels and intricate trim details. Produced in factory formed lengths up to 55 feet, Petersen’s PAC-CLAD Panels are Herr-Voss corrective leveled to provide superior flatness.  Longer lengths are available by consulting the factory.  All are available in 36 standard colors on steel and 34 standard colors on aluminum. For more information on the complete line of Petersen metal roofing products, call 800-PAC-CLAD or visit Tags: , , , , ,

Leave a Reply

You must be logged in to post a comment.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels