Petersen Metal Roofing To Be The “LAST ROOF” On Residence

Bitterman-blogNew metal roofing panels were installed on an upscale Florida residence after the original shake shingles sustained significant storm damage.  The owner wanted a metal roof that would be “the last roof we put on this house.” Approximately 12,000 sq. ft. of Petersen SNAP-CLAD™ panels were installed to meet the owner’s objective. The SNAP-CLAD system has been designed for architectural aesthetics and structural performance and meets Florida’s Building Code and Miami-Dade NOA standards for wind-uplift resistance. The 16” wide, 24 gauge galvanized steel panels were finished in Copper Penny.  Approximately 4,000 sq. ft. of PAC-CLAD flat stock was used for flashings and gutters on the project. Installation of the Petersen panels was done by RAE CO of Ocala, Ocala, FL. Produced in factory formed lengths up to 55 feet, Petersen’s PAC-CLAD Panels are Herr-Voss corrective leveled to provide superior flatness.  Longer lengths are available by consulting the factory.  PAC-CLAD® Kynar 500® finish is now available in 37 colors on steel and on aluminum.  Most colors meet LEED®, ENERGY STAR® and cool roof certification requirements. Tags: , , , , , ,

Leave a Reply

You must be logged in to post a comment.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels