The new Animal Care and Protective Services building in Jacksonville, FL is the city’s first LEED-certified project.  The 41,000 sq. ft. facility is situated on a reclaimed brownfield site and has received LEED Gold Certification. The design-build project was a collaboration of Ebert Norman Brady Architects and Auld & White Constructors.  Both firms are located in Jacksonville.  The new facility, which replaced an aging and overcrowded shelter, offers increased capacity and quality of care, adoption areas, medical treatment areas and public education space. “We wanted the building to be modern and eye-catching since it’s very visible from the intersection of I-95 and I-10,” said Tom Norman, project manager and designer with Ebert Norman Brady. Approximately 12,500 sq. ft. of 24 gauge PAC-CLAD 7.2” Rib and Perforated 7.2” Rib panels helped to accomplish the design objectives.  The panels were finished in Cardinal Red, Weathered Zinc and Interstate Blue. “There were stringent budget parameters that required very careful selection of all materials,” according to Norman.  “The majority of the building where the animals are housed utilized single block concrete to stand up to the daily maintenance of washing down the floor and walls.  But in the administrative and public areas, we rejected stucco which is commonly used in this part of the country.  We selected metal panels to give us the contemporary, state-of-the-art look we wanted for the high profile site.  We’re hopeful that having a great looking building will provide a reminder for people to visit the shelter and consider adopting an animal.” The 7.2 panels offer heavy horizontal shadow lines that were appealing for the low-slung building.  “We also punched the panels through to the interior reception area,” Norman said.  “The colors and materials give a nice definition to the various function areas.” The PAC-CLAD 7.2 panels also provide a rainscreen barrier.  “The use of the metal panels provides both practicality and image,” reports Norman.  “When the project manager for the City of Jacksonville first toured the completed job, he said ‘man, this looks fantastic’.” Installation of the Petersen panels was done by Thorne Metal Systems, Orange Park, FL. Long-recognized as an industry leader in metal standing seam roofing products, Petersen also offers exposed fastener panels, flush panels, composite wall panels and column covers.  All provide the well-known Petersen quality and are available in PAC-CLAD® Kynar 500® finish in 38 standard colors on steel and aluminum.  Most colors meet LEED®, ENERGY STAR® and cool roof certification requirements. For more information on the complete line of Petersen metal products, call 800-PAC-CLAD or visit Tags: , , , , , , , , , , , , ,

Leave a Reply

You must be logged in to post a comment.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels