First LEED Certified Building in Escambia County, FL Features Petersen Panels


The Escambia County One Stop Permit Center, located in Pensacola, Florida, became the first project in Escambia County to qualify for LEED status when it was completed in the summer of 2010. The 79,000 square foot building features services such as building inspections, environmental enforcement, fire safety, animal control, engineering and transportation services, all under one roof. Previously, these departments were housed in three separate buildings. Working closely with Petersen Aluminum’s Georgia facility, the project was value-engineered to control costs, switching from the Silver PAC-CLAD initially specified to unpainted Galvalume Plus. No loss of aesthetics here, as the complex still has plenty of curb appeal. As the project was an appropriate distance from any saltwater environment, Galvalume Plus was an ideal alternative to a PAC-CLAD Kynar finished product. Galvalume Plus offers a recycle content of 32.7%, 25.5% of which is post-consumer. The project utilized 30,000 square feet of Galvalume Plus, most notably the Snap-Clad panels used on the canopies and also as a wall panel. Petersen Flush panels were also used for the soffit areas. Installation contractor for this project was West Coast Roofing of Milton, FL, and supplied by Roofer’s Mart, Pensacola FL. Architect of Record was Walter Smith, Principal, Bay Design Associates Architects.

Leave a Reply

You must be logged in to post a comment.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels