When it comes to LEED and standing seam metal roofing, the obvious place to achieve LEED points is the recycle content. In addition to being 100% recyclable, PAC’s steel and aluminum panels both boast high recycle contents that go a long way to building up to the highest status possible on the LEED scale, but think also of the Heat Island Effect, credit 7.2 under the Sustainable Sites. LEED requires an SRI of  29 for steep slopes (> 2:12) or SRI of 78 for low slopes (less than or equal to 2:12). PAC has 20 pre-painted finishes that meet the steep slope condition, as well as non-Kynar coated Galvalume Plus. With an SRI of 86, Bone White meets the requirements for both steep and low slope roofing. And don’t forget, under the non-roof category of the Heat Island Effect, another point is available for use of a roof covering over at least 50% of the designated parking spaces that utilize products with SRI of 29 or greater. PAC standing seam metal products, such as our Snap Clad and Snap On panels, are the ideal selection as roofing material for covered parking areas Tags: , , , ,

Leave a Reply

You must be logged in to post a comment.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels