Intricate installation Made Easy By J. Register Company

Like everything else in life, some construction projects are easier than others. The Custead Care Haven Hospice Center, in Orange Park, FL.,  fell into the demanding category, but the J. Register Company of Jacksonville, FL was up for the challenge.

The project consisted of 42,000 square feet of Petersen Aluminum’s Snap-Clad standing seam architectural metal panels in unfinished 24 gauge Galvalume Plus. The details were the critical element in this project, as nearly every NRCA and SMACNA flashing detail came into play. J. Register Company pulled it off flawlessly, resulting in a stunning project that is not only economical but meets all requirements as specified in the Florida Building codes.

Standing seam metal panels were specified from the start, and PAC’s Acworth, GA plant facilitated the use of Snap-Clad as well as the PAC R-36 exposed fastener panel with upfront expertise of the Florida Building Approvals and assistance with all required submittals.

The Custead Care Center is the fifth free standing care center within the Haven Hospice system located throughout northern Florida.  Architect-of-Record is AG Architecture of Wauwatosa, WI.

Leave a Reply

You must be logged in to post a comment.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels