Seven new metal wall panels add visual depth to building exteriors

Petersen expands its Precision Series line of metal wall panels with the addition of seven new Highline products. The Precision Series Highline wall panels feature varying rib patterns and widths for creative architectural effects in commercial, institutional, residential or many other applications. The new Highline panels are 1 3/8-in. deep, resulting in dramatic building exteriors and deeper shadow lines than the original Precision Series HWP, which is 7/8-in. deep.

The Highline wall panels showcase a range of rib patterns for visual interest and architectural creativity. Options include either 12-in. or 16-in. widths, a no-clip panel, or a clip-fastened panel to accommodate thermal expansion and contraction. Highline panels can be specified with perforations for bold aesthetics or application as equipment screens, and can be installed horizontally or vertically.

Highline panels are available in the following materials: .032, .040 and .050 aluminum, plus 24 and 22 gauge steel. Maximum length is 30-ft. for steel and 22-ft. for aluminum. All gauges and lengths are covered by a 30-year finish warranty.

The Highline series was introduced in two phases: Phase one included four panels in 2016, and phase two included three additional panels in 2017. Phase two also included the renaming of the seven new panels, which are now called the Highline series.

The Highline series is available in all 45 of Petersen’s PAC-CLAD colors, 32 of which meet Energy Star requirements, and 30 of which are Cool Roof certified. The panels qualify for LEED points, and meet various testing and approval standards.

Comments are closed.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels