Two-story hunting facility features variety of pitches and planes

The designers of this private hunting preserve and working farm in southern Georgia, utilized multiple PAC-CLAD profiles to roof and clad seven individual structures on the 10,000-acre plantation. The buildings include a 16-horse stable, dog kennels, large barn, equipment sheds, maintenance facilities and administrative offices.

Nearly 100,000 sq. ft. of Petersen material was installed in a variety of applications. “Every bit of the exterior surface is covered with PAC-CLAD material. It’s 100% Petersen,” said installer John Salo, vice president of Seco Systems Inc. in Suwanee, Ga. Seco Systems was involved early in the design phase of the project and brought in Petersen due to the installer’s experience and history with Petersen. “We get a lot of support from those guys,” Salo said. “We went into the project with the expectation of superior quality.”

The Petersen material included 50,000 sq. ft. of Snap-Clad Panels; 13,000 sq. ft. of Tite-Loc Plus Panels; 18,000 sq. ft. of Integrated Batten Siding; 9,100 sq. ft. of Flush Panels; and 4,000 sq. ft. of Reveal Panels. The Snap-Clad and Tite-Loc Plus Panels were finished in Hemlock Green and the Batten Siding, Flush Panels and Reveal Panels were finished in Granite. All were 24 gauge steel.

The greatest variety of Petersen profiles was used on the barn. “The barn was the most magnificent building,” Salo said. Snap-Clad Panels were installed on the roof of the two-story structure, which was designed with an engaging variety of pitches and planes. “We used the vertical Batten Siding panels on the first floor of the barn and all the other buildings. On the barn, we installed the Reveal Panels horizontally on the second floor all the way up to the eave. It really looks nice,” Salo said.

The Tite-Loc Plus Panels were utilized on two open framing buildings that required a structural panel. Tite-Loc Plus panels are factory-formed to length and field-seamed to a 180° lock. The Reveal Panels were used primarily in soffit applications.

Architectural design for the project was created by A.T. Franco & Associates in Ft. Lauderdale, Fla.

The Petersen distributor on the project was Commercial Roofing Specialties in College Park, Ga.

Comments are closed.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-TITE Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels