PAC SS Rake Panel & Fascia

PAC SS Rake Panel & Fascia

  • Superior finishing edge for roof rake
  • 12' lengths for efficient installation
  • Designed specifically to project requirements
  • Complements PAC SS Vented Eave products
  • Wide variety of finishes for unmatched visual appeal
  • Pre-punched, slotted fastening holes
  • Cost-efficient, labor saving design

Petersen Aluminum offers its line of Airflow systems, designed specifically with commercial buildings in mind. Highly suitable for both shingle and metal roofs, the system allows for balanced intake and exhaust ventilation to provide optimal airflow, greatly increasing the roof’s longevity and energy efficiency.


Petersen offers a complete line of ventilation products, which in unison, provide consistent airflow under the roof covering:

  • PAC SS Vented Eave
  • PAC Eco Eave Vent
  • PAC SS Rake Fascia/Rake Panel
  • PAC SS Ridge Vent

PAC SS Rake Panel & PAC Rake Fascia

Petersen’s PAC SS Rake Panel and PAC SS Rake Fascia offer outstanding aesthetics in areas where ventilation is not required. Available in a wide range of colors, these products provide the perfect finishing touch for the edge rake side of the roof, complementing the PAC SS Vented Eave.


PAC SS Rake Panel and PAC SS Rake Fascia can be selected in sturdy 24 GA steel or .040, .050 and .063 aluminum, engineered to specific job requirements to meet the needs of any roof condition. The highly cost-efficient design also eliminates the need for wood blocking and soffits for additional savings as well as reducing the number of trades required to complete the project.


Provided in 12’ sections with pre-punched holes, SS Rake Panel and SS Rake Fascia install quickly and efficiently. Slotted holes allow for thermal movement of the material for long-term performance.


Importance of Ventilation

Plain and simple, proper airflow designed into the roof structure will extend the life of the roof. Premature re-roofing is expensive, and inconvenient to the building occupants. Without consistent and balanced airflow and proper NFA, moisture build-up will occur, which can damage the roof covering over time. Temperature fluctuations will cause snow melting and refreezing, resulting in ice dams on the roof that can cause structural damage as well as hazards to life and property on the ground.


In addition, providing constant air movement prevents heat build-up in the summer and heat loss in the winter, resulting in a more sustainable building with lower operating costs.


PAC Airflow systems, designed specifically for ventilation needs at the eave and the ridge of each project, contribute to the green roof system for superior sustainability and life-cycle value.




  • 38 Stocked PAC-CLAD Finishes - 24 GA Steel
  • 18 Stocked PAC-CLAD Finishes - .040 Aluminum
  • 29 Stocked PAC-CLAD Finishes - .050 Aluminum
  • 6 Stocked PAC-CLAD Finishes - .063 Aluminum

5-Year Workmanship Warranty

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels