Bells Mill Elementary School

 -  -  -  -  -

METAL PANELS HELP NEW SCHOOL.
RELATE TO RESIDENTIAL ENVIRONMENT, RURAL HERITAGE.

 

The Bells Mill Elementary School in Potomac, MD encourages a flexible approach to education that accommodates changing programs, interdisciplinary teaching methods and efficient, cost-effective use of space.

 

The 77,000 sq. ft. building is a partial two-story steel-framed structure with brick and metal exterior facades that complement the site’s residential character as well as the area’s rural heritage.  Exterior colors are reminiscent of those found on traditional homes in the region.

 

The colorful, striking design for the project was provided by Walton, Madden, Cooper, Robinson, Poness, Inc., Hyattsville, MD. Approximately 18,000 sq. ft. of 12” x 1.5” aluminum PAC-CLAD Snap-On Batten metal wall panels and 2,500 sq. ft. of PAC-850 Soffit Panels were utilized to create the desired effect.  Colors included Hemlock Green, Colonial Red, Sandstone and Slate Gray.  All are PAC-CLAD Cool Colors.

 

“This was a large program and we felt the need to break it down into components that would produce scale-friendly and child-friendly elements,” according to Michael Poness, design principal at WMCRP.  “Color became very important and we were pleased with the combination of colors and textures that we had to choose from.  We combined the metal panels with masonry to create a lighter wall on the upper stories.”

 

The Petersen panels were also utilized on an interior application in the two-story entryway that leads up to the school library on the second floor.  “We looked at the library as sort of the heart of the school,” Poness said.  “We often try to bring the exterior material into the interior as a finish.”

 

The Petersen panels were installed by CitiRoof Corporation, Columbia, MD.  The general contractor on the project was Oak Contracting, Towson, MD.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-TITE Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels