Fuji Photo Film U.S.A.


Fuji Photo Film U.S.A., Inc. utilized Petersen’s flush metal roofing panel soffits and an extensive custom fascia system to provide highlights on its new facility in Hanover Park, IL.


The project was designed to create a contemporary, modern look that would reflect the high-tech position of Fuji within the marketplace and yet make the environment appealing and inviting as a corporate workplace.


Approximately 6,400 square feet of Petersen’s .063 clear anodized aluminum was used for the fascia system and 5,000 square feet of .032 clear anodized aluminum for the soffits.


In order to achieve the design effect, Sullivan Roofing Inc., Mount Prospect, IL, installed two layers of substrate in order to create the reveals that were desired. “The reveals were extremely tight,” said Tim Sullivan. “The radius soffits on the rotunda were a particular challenge, especially when you consider we were installing in the dead of winter with a minus 30 degree wind chill. The two-piece fascia system was totally custom fabricated in our shop. The flush panels were fabricated by Petersen. Everything turned out great and we achieved an outstanding look that everyone is quite proud of.”


Two architectural firms were involved in the project: Formations Architects & Planners, Itasca, IL and Sparks Architects Inc., Elmhurst, IL.


The general contractor was Kajima Construction Services, Inc., Palatine, IL.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels