Jekyll Island Convention Center

 -  -  -

The beautiful new 128,000 sq. ft. Jekyll Island Convention Center is the only beachfront meeting facility of its kind on the east coast south of New Jersey.  Featuring 78,000 sq. ft. of meeting space, the center is literally located among the sand dunes.  An adjoining beachfront park provides public space and amenities for convention-goers and local residents alike. 
Approximately 70,000 sq. ft. of PAC-CLAD .040” aluminum Tite-Loc Plus and Snap-Clad panels finished in Slate Gray were utilized in addition to 10,000 sq. ft. of PAC-850 Soffit Panels in Bone White.  In addition to the convention center, PAC-CLAD was also used to roof seven activity buildings and pavilions throughout the seaside park. 
The Petersen panels interface with stucco-finished masonry and historic tabby stone cement material that incorporates shells actually taken from the Jekyll Island beaches.  The tabby stone was formed into precast panels that were installed around the bases of columns and the wainscoat of the building. 
Design for the project was provided by Helman Hurley Charvat Peacock/Architects, Inc., Maitland, FL. 
“We needed a durable palette of materials because of the coastal environment,” according to Mike Chatham, president of the firm.  “We initially considered a steel roof but couldn’t get an adequate warranty.  We quickly moved to aluminum and contacted Petersen and they had a solution for all of the challenges we were running into.  Our engineers determined the structural wind loading requirements and the Petersen folks came back with an answer to every wind condition we had.  It was awesome.” 
Budget was also an issue with the roof.  “We bid it out.  It wasn’t a sole-source job,” Chatham said.  “Petersen was the only company that was competitive.” 
Installation of the PAC-CLAD material was done by Delphini Construction, Altamonte Springs, FL.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels