Marriott Surfwatch Condominiums

 -

The Marriott Surfwatch Condominiums utilized more than 134,000 square feet of Petersen PAC-CLAD aluminum material throughout a five-phase building project on Hilton Head Island, SC.  The luxurious condominium resort offers elegantly appointed two and three-bedroom villas with upscale indoor and outdoor amenities.

 

Of the total material utilized, approximately 88,000 sq. ft. was .032 aluminum Snap-Clad metal roofing panels and 46,000 sq. ft. was .040 aluminum flat sheet flashing material.  All was finished in custom color Charlotte Slate.

 

Design of the project was undertaken by NCG Architects Inc., Atlanta.  The firm specializes in resorts and golf clubs throughout the Southeast coastal area.  According to Jim Carson, Project Principal and Lead Designer, “The design intent was to manipulate the building massing, architectural detailing and color palette in order to harmonize with the natural features of the sites.  The exterior materials, including stucco and the standing seam metal roof

 

Carson goes on to say that, while this was the first time the firm had specified PAC-CLAD material, they were aware of Petersen’s quality reputation.  “And Petersen simply provided the best price in a tight budget situation.  We were really pleased with the performance of their people and their metal roofing products.”

 

NCG Architects uses aluminum exclusively for projects in coastal regions.  Aluminum is corrosion-resistant and maintains color consistency in applications where salt spray is an issue.

 

The Snap-Clad metal roofing panels were utilized on five individual condominium buildings plus a central facilities building, guardhouses, beach bar pavilion, restroom buildings and equipment structures.

 

Southern Roof & Wood Care Corporation, Hilton Head Island, completed installation of the PAC-CLAD material.  In addition to standing seam metal roofing panels, the 46,000 sq. ft. of flat sheet material was used for custom detail work.  According to David Swanson, president of Southern Roof, “There were many unique items included in this job including custom finials, custom parapet wall louver vents and custom flashings installed to the tops of trellis rest stations…all of which we fabricated in-house.”

 

Swanson also said, “Petersen was very helpful throughout the project in terms of design, engineering, budgeting, manufacturing and delivery.  We’ve since used their panels on several buildings in the area.  All of the projects have turned out great.”

 

The general contractor was Hardin Construction Company, Atlanta.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-TITE Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels