St. Joseph Mercy Health Center

 -  -  -  -  -

St. Joseph Mercy Health Center in Canton, MI has opened the Center for Advanced Medicine & Surgery.  The 53,000 sq. ft. outpatient facility offers a variety of advanced services—some of which are normally found only at full-service hospitals.


Several Petersen profiles were selected to meet the design objectives for the $20 million project.  Approximately 13,200 sq. ft. of 24 gauge, 18” Snap-Clad panels were utilized on the main portion of the roof in addition to 3,800 sq. ft. of 24 gauge, 16” Tite-Loc panels utilized to clad the barrel roof and entrance canopy.  Approximately 2,800 sq. ft. of 12” Flush panels were used for soffit and trim applications. Plus, Petersen Composite Wall panels were used in fascia and column cover applications.  All panels were finished in Hemlock Green.


Installation of the Petersen panels was done by Lutz Roofing Company, Shelby Township, MI.  “The radius panels were long—60 feet.  The challenge was getting them up to the roof,” said Jim Borgiel, project manager.  “And, of course, we had a tight timeframe but we’re accustomed to that.  The job turned out great.”


Design for the project was provided by HKS Architects, Farmington Hills, MI. The general contractor was George W. Auch Company, Pontiac, MI.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels