Fort Hood Religious Facility

 -  -  -  -

The new Chapel Complex & Religious Education Facility at Fort Hood, Texas provides non-denominational space for religious and community activities.   The 42,000 sq. ft. facility has received LEED Gold certification.

 

The $27 million campus is a two-phase design/build project that will, upon completion of the second phase, be the largest of its kind in the Army.  The goal is to enhance the spiritual fitness of soldiers and families.

 

Solis Constructors, Inc., Austin, TX functioned as the design/builder for the U.S. Army Corps of Engineers.

 

Approximately 45,000 sq. ft. of Petersen’s Snap Clad panels was used on this project.  The 24 gauge, 16” striated panels were finished in PAC-CLAD Cityscape Cool Color.  One challenge posed was long panel runs in the building design. Nearly 20,000 sq. ft. of panels reaching up to 80’ in length were roll formed on site, and were installed by A.D. Willis Company Roofing & Sheet Metal, Austin.

 

According to Solis Constructors project manager Stephen Cervantes, “The Corps of Engineers has rigid, standardized requirements for roofing systems which included seaming, flashing details, salt spray testing, wind lift, etc.  Petersen and the installer met those requirements with no difficulty and provided an excellent installation.”

 

Lightning protection was another issue.  “The Corps is also very specific about that,” Cervantes said, “but Petersen had standard details in place that meet the lightning protection requirements.  That really helped us.”

 

The PAC-CLAD metal roof system has become the preferred system at Ford Hood, according to Cervantes.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-TITE Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels