Killeen Police Headquarters in Texas

 -  -  -  -

The new 80,000 sq. ft. police headquarters in Killeen, TX enables the city to consolidate its police operations from four scattered buildings into one location on a sloping 15 acre site that was once a cattle ranch.  The $22 million facility more than doubles the department’s previous space and includes training areas, community rooms and office and administrative space.

Designed to complement the rural setting, building materials include limestone, textured concrete and metal panels. Approximately 78,000 sq. ft. of PAC-CLAD material was utilized on the project.  The standing seam roof features approximately 37,500 sq. ft. of 22 gauge Silver Snap-Clad panels.  Snap-Clad panels were also installed vertically in wall applications.  In addition, approximately 40,500 sq. ft. of Silver and Zinc Flush panels and Flats was also used on the project.

Design for the project was provided by PSA-Dewberry Architects, Dallas.  The building features a curvature in design which has a concave eave on one side and a convex eave on the other that required partial tapering of panels on both sides of the roof to maintain uniformity.

Installation of the Petersen material was done by BRI Roofing & Sheet Metal, Haslet, TX.   “The basic challenge was to keep the panels from ‘growing’ as we laid them,” said Mike Beeter, president and CEO of BRI.  “So we had to custom form every 15th or so panel in order to allow everything to stay in alignment.”

Lee Lewis Construction, Dallas, served as the construction manager-at-risk on the project.
Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels