Sarasota Yacht Club

 -  -  -  -

Dating back to 1926, the Sarasota Yacht Club offers a high-profile waterfront location that is inviting to members and tropical storms alike.  The club’s new 22,000 sq. ft. building is built up and replaces an on-grade structure that frequently bore the brunt of storms.


The new roof is built to Florida Building Code negative wind uplift pressures of 130 MPH per the construction drawings and utilizes 23,000 sq. ft. of .040” aluminum PAC-CLAD TiteLoc Plus panels.  The 16” wide aluminum panels were finished in Cool Color Silver.


The two-story building presents a striking presence on the Sarasota waterfront when passing over the John Ringling Bridge or from nearby St. Armand’s Key.


Architectural design was provided by DSDG, Inc.,Sarasota.  The main structure is clearly plantation style but the architectural style is modern.  “’Coastal contemporary’ is a phrase the club gave us to model our design from,” said Tom Denslow, principal at DSDG.


Installation of the Petersen metal roof was done by All Steel Consultants, Inc., Palmetto, FL.  “Given the high visibility of the building as well as the roof, the metal decking had to be near-perfect in order to get the best results from the aluminum panels,” according to Ralph George, president.  “Fortunately, we had a local GC that paid close attention to details.  Consequently, the roof looks wonderful and, of course, the aluminum is ideal for the coastal application.  We even used stainless steel clips and fasteners since the building is right on the water.  It’s really a pretty roof!”


The general contractor on the project was Tandem Construction,Sarasota.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels