Shops at Highland Village

 -  -  -

Located 29 miles northwest of Dallas, The Shops at Highland Village is an upscale, mixed-use lifestyle center consisting of approximately 350,000 sq. ft. of retail and restaurants and 32,000 sq. ft. of office space.  The architectural theme for the 16-building destination development is Texas Hill Country. The site design provides for a central gathering spot and a street plan which encourages exploration and discovery of the various shops.

More than 108,000 sq. ft. of PAC-CLAD material in a variety of profiles including 16” Snap-On,  18” High Snap-On, 16” Snap-Clad and 11” Flush Panels were utilized to create the desired look.  All material was finished in Custom Literary Green and Weathered Zinc.

The Petersen panels were installed by GNP, Inc., Forney, TX.  Design for the project was provided by O’Brien & Associates, Dallas, TX.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels