The Bitterman Residence


This residential metal roofing is exactly what was needed after the original shake shingles sustained significant storm damage. The owner of an upscale residence in Orlando, FL wanted a new metal roof installed that would be “the last roof we put on this house.”  Approximately 12,000 sq. ft. of Petersen SNAP-CLAD™ metal roofing panels were installed to meet the owner’s objective.


The SNAP-CLAD residential metal roofing system has been designed for architectural aesthetics and structural performance and meets Florida’s Building Code and Miami-Dade NOA standards for wind-uplift resistance.


The 16” wide, 24 gauge galvanized steel panels were finished in Copper Penny.  Approximately 4,000 sq. ft. of PAC-CLAD metal roofing flat stock was used for flashings and gutters on the project.


Installation of the Petersen panels was done by RAE CO of Ocala, Ocala, FL.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels