SDS Arconic Sheet, Coil

iple languages spoken) 1 (24 Hour Emergency Telephone, English only) 1-412-553-4822 1073 Warning Supplemental information Dust and fumes from processing: Can cause mechanical irritation of the eyes, skin and upper respiratory tract. Combustion of the coatings can generate toxic and irritating gases. This product does not present fire or explosion hazards as shipped. Small chips, fine turnings and dust from processing may be readily ignitable. Explosion/fire hazards may be present when: • Dust or fines are dispersed in air. • Chips, dust or fines are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). FIRE FIGHTING MEASURES: Use coarse water spray on chips and turnings. DO NOT USE water in fighting fires around molten metal. DO NOT USE halogenated extinguishing agents on small chips/fines. These fire extinguishing agents will react with the burning material. IN CASE OF SPILL: Collect scrap for recycling. If molten: Use dry sand to contain the flow of material. All tooling (e.g., shovels or hand tools) and containers which come in contact with molten metal must be preheated or specially coated, rust free and approved for such use. Allow the spill to cool before remelting as scrap. Wear appropriate personal protective equipment. See Arconic SDS Number 1073.