PAC-TITE WT Canted Fascia

WT Ext Canted Fascia-Waterdam
WT Canted Fascia-Waterdam

PAC-TITE WT Canted Fascia

WT Ext Canted Fascia-Waterdam

WT Ext Canted Fascia-Waterdam
WT Canted Fascia-Waterdam
Features
  • Superior, efficient design for ease of installation
  • Extensively tested for reliable, long-term performance
  • Welded corners and scuppers available (for aluminum products only)
  • Wide variety of colors and finishes
  • Pre-punched, slotted holes for precise fastener placement
  • Non-penetrating design maintains watertightness integrity
  • Reusable and recyclable material
  • Custom and radius capabilities available

The PAC-TITE line of roof edge systems provides unmatched uplift protection for single-ply and built up/modified roof systems. Combining superior strength and aesthetics with ease of installation, PAC-TITE fascias offer the ideal solution in a wide variety of roof edge applications.

 

PAC-TITE WT Canted Fascia with Galvanized Waterdam features a unique design that keeps the flange out of the waterline. It is available in two profiles, both in .050 and .063 aluminum fascia covers: The standard Canted Fascia version is available in a 5 1/2″ face. The PAC-TITE WT Extended Canted Fascia profile is offered in 9″ to 13 1/2″ face heights to accommodate multiple nailers without the need for a fascia extender.

 

A non-penetrating design eliminates the need for stripping in and heat welding. The fascia features an extruded aluminum anchor bar to securely terminate the membrane, and is readily available for quick shipment to dry-in the roof structure for added installation flexibility.

 

Two Versions Available

Both versions of PAC-TITE WT Canted Fascia have been extensively tested to meet ANSI-SPRI ES-1, FM 1-270 Approvals and Miami-Dade:

  • WT Canted Fascia with Galvanized Waterdam
  • WT Extended Canted Fascia with Galvanized Waterdam

Additionally, PAC-TITE WT Canted Fascia is backed by a Lifetime 215 mph wind warranty to ensure long-term, worry-free performance.

 

PAC-TITE WT Canted Fascia features pre-punched holes which not only provides quicker installation for labor savings, but are slotted to allow for thermal movement for guaranteed long-term performance. Interlocking, concealed splice plates prevent splice plate migration for a more architecturally pleasing finish.

 

Offering a wide range of factory-fabricated accessories such as miters, scuppers and drainage components, Petersen Aluminum provides the complete system to ensure a clean, sure-fitting product while eliminating the need for field fabrication.

Materials:

  • 29 Stocked PAC-CLAD Finishes - .050 Aluminum
  • 6 Stocked PAC-CLAD Finishes - .063 Aluminum
  • Mill Finish Aluminum - .050 & .063 Aluminum
  • Clear and Colored Anodized - .050 & .063 Aluminum
  • 14 stocked PAC-CLAD finishes - 22 GA Steel
  • ANSI/SPRI/FM 4435/ES-1 Standard to a design pressure of 190 lbs/ft2 to comply with the International Building Code
  • Factory Mutual 1-270 approved
  • Miami-Dade Approved - High Velocity Hurricane Zone

A Lifetime 170 mph warranty is available. It covers replacement or repair of any portion of the roof edge system that has failed due to a defect in the supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-TITE Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels