PAC-Continuous Cleat Coping

PAC-Continuous Cleat Coping

Coping Systems

Features

task_altElimination of field-crimping for certain products
task_altWide variety of colors and finishes
task_altCompliant with most relevant building codes
task_altSuperior, efficient design for ease of installation
task_altCustom fabricated to specific job requirements to ensure superior fit
task_altReusable and recyclable material
task_alt20-year, 120-mph warranty for PAC-Continuous Cleat coping systems
task_altExtensively tested for reliable, long-term performance
task_altConvenient 12’ lengths
task_altCustom and radius capabilities available

Features

task_altElimination of field-crimping for certain products
task_altWide variety of colors and finishes
task_altCompliant with most relevant building codes
task_altSuperior, efficient design for ease of installation
task_altCustom fabricated to specific job requirements to ensure superior fit
task_altReusable and recyclable material
task_alt20-year, 120-mph warranty for PAC-Continuous Cleat coping systems
task_altExtensively tested for reliable, long-term performance
task_altConvenient 12’ lengths
task_altCustom and radius capabilities available

The innovative design of PAC-CLAD Continuous Cleat Coping permits the installation of a sloped coping cap over extra wide walls. The support of the cleat substantially reduces sagging, which can induce ponding and the possibility of leaks. For further weather tightness, neoprene strips are factory applied to each hold down cleat (see illustration).

Factory-supplied fasteners accompany each coping order to assure proper attachment of the cleats to the wood nailer. Field-crimping on the inside leg of the coping to the inside hold down cleat completes the installation.

Wind Uplift

Material Wall Width FM I-90 FM I-105 FM I-120 FM I-165 FM I-180
24 ga. Steel 16″ Max
22 ga. Steel

16″ Max

22 ga. Steel

15″ Max

 •
.050, .063 Alum.

24″ Max

.050, .063 Alum.

16″ Max

.050, .063 Alum.

15″ Max

PAC-Continuous Cleat Coping
zoom_in
layers43 stocked colors (24 gauge steel)
layers16 stocked colors (22 gauge steel)
layers36 stocked colors (.032 aluminum)
layers22 stocked colors (.040 aluminum)
layers29 stocked colors (.050 aluminum)
layers6 stocked colors (.063 aluminum)
layersGalvalume Plus available

The innovative design of PAC-CLAD Continuous Cleat Coping permits the installation of a sloped coping cap over extra wide walls. The support of the cleat substantially reduces sagging, which can induce ponding and the possibility of leaks. For further weather tightness, neoprene strips are factory applied to each hold down cleat (see illustration).

Factory-supplied fasteners accompany each coping order to assure proper attachment of the cleats to the wood nailer. Field-crimping on the inside leg of the coping to the inside hold down cleat completes the installation.

Wind Uplift

Material Wall Width FM I-90 FM I-105 FM I-120 FM I-165 FM I-180
24 ga. Steel 16″ Max
22 ga. Steel

16″ Max

22 ga. Steel

15″ Max

 •
.050, .063 Alum.

24″ Max

.050, .063 Alum.

16″ Max

.050, .063 Alum.

15″ Max

PAC-Continuous Cleat Coping
zoom_in

layers43 stocked colors (24 gauge steel)
layers16 stocked colors (22 gauge steel)
layers36 stocked colors (.032 aluminum)
layers22 stocked colors (.040 aluminum)
layers29 stocked colors (.050 aluminum)
layers6 stocked colors (.063 aluminum)
layersGalvalume Plus available
close
close