Precision Series Tiles

Cupped Tile

The cupped tile catches light at multiple angles that creates a multi-shade effect as viewing perspective changes. In roof applications, installers can safely walk on the cupped tiles during installation.

  • Nominal: 15” x 9-5/8”
  • Exposed: 14-1/2” x 8-5/16” +/- 1/16”

Flat Tile

The flat tile has the flexibility to integrate with both modern and traditional designs.

  • Nominal: 15” x 9-5/8”
  • Exposed: 14-1/2” x 8-5/16” +/- 1/16”

Diamond Tile

Diamond tiles can be installed horizontally, or on an angle to achieve a diamond or clapboard pattern.

  • Nominal: 8-5/16″ x 9-3/4″
  • Exposed: 7-1/4” x 8-5/16” +/-1/16”

TS Tile

The TS tile’s larger height creates a vertically oriented pattern.  

  • Nominal: 7-3/4” by 17-1/4”
  • Exposed: 7-1/4” by 16-1/4” +/- 1/16”

The Precision Series Tiles collection of metal tiles from Petersen includes four profiles that offer designers, specifiers and installers an alternative to roll-formed panel-style cladding. The stamped tiles can be applied to roof or wall installations, and are offered in four styles including Flat, Cupped, Diamond and TS. Designed to enhance architectural design, the tiles add dimension to the exterior of any structure. The tiles can be applied to either non-residential or residential environments, and are covered by a 30-year finish warranty. 

The interlocking tiles are formed using progressive tooling to create a uniform and cost-effective cladding solution. This system installs directly over plywood or elevated channels using concealed fasteners. No sealant is required, as the tiles form breathable joints. Thermal gain and movement is not an issue, as the small size of each tile means movement will be minimal. Only basic sheet metal tools are required to work with these products.

The tiles are available in 40-plus PAC-CLAD colors in the following materials:

  • .032 aluminum
  • 24 gauge steel
  • 26 ga. Type 304 Stainless (Natural Mill Finish, Color Level I & II). Consult with PAC for color availability
  • 26 ga. ZALMAG (Natural & Pre-Patina II)

Minimum slope for roof applications is 3:12. Consult factory for testing information.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels