R-36

Exposed Fastener Panels

Petersen offers a variety of exposed fastener panels, including the 7.2, R-36, and 7/8” Corrugated, suitable for roofs, walls, and linear panels. M-36, M-42, and 1/2” Corrugated are ideal for wall and equipment screen projects. Trim options include PAC-CLAD aluminum and steel, with a 35-year warranty and vinyl masking for protection during fabrication.

Case Studies

Hurricane Harbor Water Park

Documents

Features

35-year non-prorated finish warranty
Matching screws and rivets
Closure strips available
Precut short lengths (5'-0" minimum)
Panel lengths up to 30' on steel and 22' on aluminum

Overview

Petersen offers a complete line of exposed fastener panels, allowing for creative design flexibility in a cost-effective yet architecturally attractive metal panel. The versatile 7.2 panel, R-36 and 7/8” Corrugated panels can be specified for a wide range of building envelope applications including roofs, walls and linear panels. The M-36, M-42 and 1/2” Corrugated panels are suitable for wall and equipment screen projects.

Trim
All flashing and trim shall be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032 – .063 gauge as specified) or PAC-CLAD steel (24 gauge or 22 gauge as specified). A 35-year non-prorated finish warranty can be supplied covering finish performance.

Vinyl masking is recommended on all fabrication applications where extra handling is expected. NOTE: The strippable film must be removed immediately after installation.

Materials

48 stocked colors (24 gauge steel)
17 stocked colors (22 gauge steel)
34 stocked colors (.032 aluminum)
26 stocked colors (.040 aluminum)
21 stocked colors (.050 aluminum)
Galvalume Plus available

35-year non-prorated finish warranty
Matching screws and rivets
Closure strips available
Precut short lengths (5'-0" minimum)
Panel lengths up to 30' on steel and 22' on aluminum

Petersen offers a complete line of exposed fastener panels, allowing for creative design flexibility in a cost-effective yet architecturally attractive metal panel. The versatile 7.2 panel, R-36 and 7/8” Corrugated panels can be specified for a wide range of building envelope applications including roofs, walls and linear panels. The M-36, M-42 and 1/2” Corrugated panels are suitable for wall and equipment screen projects.

Trim
All flashing and trim shall be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032 – .063 gauge as specified) or PAC-CLAD steel (24 gauge or 22 gauge as specified). A 35-year non-prorated finish warranty can be supplied covering finish performance.

Vinyl masking is recommended on all fabrication applications where extra handling is expected. NOTE: The strippable film must be removed immediately after installation.

48 stocked colors (24 gauge steel)
17 stocked colors (22 gauge steel)
34 stocked colors (.032 aluminum)
26 stocked colors (.040 aluminum)
21 stocked colors (.050 aluminum)
Galvalume Plus available
close
close