Flush/Reveal Soffit

Flush Soffit
Reveal Soffit
Flush Wide Vent
Flush Narrow Vent

Flush/Reveal Soffit

Flush Soffit

Flush Soffit
Reveal Soffit
Flush Wide Vent
Flush Narrow Vent
** Not available in steel
  • Four profiles available
  • Perforation available for ventilation on aluminum only
  • Roll-formed to exact lengths
  • Matching “J” trim available
  • Flush panels now available with venting
  • 30-year non-prorated finish warranty

Petersen Aluminum offers superior design versatility for soffit applications by providing the Flush panel in a variety of gauges and widths. Both pre-formed profiles are effective solutions in soffit projects, and with the aluminum substrate can be ventilated for increased airflow capacity.



Petersen Aluminum can provide soffit “J” channel as trim to match any of our soffit panels. “J” Channel is available in lengths up to 12’ in matching colors.



The Flush panel and Reveal panel may be specified for use as soffit panels. They are roll-formed from .032 aluminum, .040 aluminum, 24 or 22 gauge steel and tension-leveled to ensure flatness.


Stiffener beads can be added to the Flush panel for increased strength and aesthetics. Stiffener beads are recommended for longer panel lengths. One or two beads are available at no additional cost.



The Flush panels in aluminum are available ventilated. Consult the local factory for venting options.


  • 38 stocked colors (24 ga. steel) (Flush/Reveal soffit only)
  • 15 stocked colors (22 ga. steel) (Flush/Reveal soffit only) *
  • 36 stocked colors (.032 aluminum)
  • 20 stocked colors (.040 aluminum) (Flush/Reveal soffit only) *
  • Galvalume Plus available (Flush/Reveal soffit only)
* Limited color availability
Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels