Tite-Loc Coping

Tite-Loc Coping

  • Available for wall sizes 6"-16"
  • FACTORY MUTUAL TESTED (see cleat diagram & wind uplift chart).
  • Made 3/4" larger than the wall to compensate for membranes and inconsistencies

The system features a built-in sealing mechanism incorporated into the splice plate (see illustration). This proprietary feature not only adds rigidity, but insures a weathertight joint. Proper installation requires that the hold-down cleat be attached with four top fasteners and two face fasteners, spaced as shown. PAC-CLAD TITE-LOC coping may be specified with either a neoprene compression pad or a metal compression strip.


Wind Uplift


Wall Width

Factory Mutual I-60

Factory Mutual I-90

24 ga. Steel


22 ga. Steel


.050 Alum.


.063 Alum.


.080 Alum.


.125 Alum.



I-60 = 418 lbs. of upward pressure

I-90 = 628 lbs. of upward pressure


*Call for test results and hold down cleat spacing.


  • 38 stocked colors (24 ga. steel)
  • 13 stocked colors (22 ga. steel)
  • 37 stocked colors (.032 aluminum)
  • 18 stocked colors (.040 aluminum)
  • 28 stocked colors (.050 aluminum)
  • 6 stocked colors (.063 aluminum)
  • Galvalume Plus available
Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels