SDS Arconic Sheet, Coil

Precautionary statement Prevention Wash thoroughly after handling. Response Wash with plenty of soap and water. Storage Keep dry. Disposal Reuse or recycle material whenever possible. Hazard(s) not otherwise classified (HNOC) None known. Supplemental information The mixture does not meet the criteria for classification. Non-combustible as supplied. Small chips, fine turnings, and dust from processing may be readily ignitable. Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): • Dust or fines are dispersed in air. • Chips, dust or fines are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Dust and fume from processing: Can cause irritation of the eyes, skin and upper respiratory tract. Combustion of the coatings can generate toxic and irritating gases. Specific hazards 3. Composition/information on ingredients Complete composition is provided below and may include some components classified as non-hazardous. Composition comments Mixtures CAS number % Common name and synonyms Chemical name 7429-90-5 >94 Aluminum 7439-95-4 <5 Magnesium 7440-21-3 <2 Silicon 7439-89-6 <2 Iron 7439-96-5 <1.5 Manganese 7440-47-3 <0.35 Chromium Not Applicable <10 Coatings† 7789-06-2 ≤0.05 Strontium chromate‡ † Coatings include: vinyl, epoxy, polyester, siliconized polyester, acrylic, fluorocarbons, polyurethane, petrolatum, chromium conversion and titanium conversion. ‡ - Backers 1BHL5626, 1BHY5137, 45D43C and 45Y58 only Additional compounds which may be formed during processing are listed in Section 8. Additional Information 4. First-aid measures Dust and fumes from processing: Rinse eyes with plenty of water or saline for at least 15 minutes. Consult a physician. Eye contact Dust and fumes from processing: Wash skin with soap and water for at least 15 minutes. Get medical attention if irritation develops or persists. Skin contact Dust and fumes from processing: Remove to fresh air. Check for clear airway, breathing, and presence of pulse. If breathing is difficult, provide oxygen. Loosen any tight clothing on neck or chest. Provide cardiopulmonary resuscitation for persons without pulse or respirations. Consult a physician. Inhalation Dust and fumes from processing: If swallowed, dilute by drinking water. Recommend quantities up to 30 mL (~1 oz.) in children and 250 mL (~9 oz.) in adults. Never give anything by mouth to a victim who is unconscious or is having convulsions. Do NOT induce vomiting. Consult a physician. Ingestion 2 / 14 Material name: COATED COIL AND SHEET 1073 Version #: 06 Revision date: 10-28-2016 Issue date: 10-28-2016 SDS US