SDS Arconic Composite

Precautionary statement Prevention Obtain special instructions before use. Do not breathe dust/fume. Prevent dust accumulation to minimize explosion hazard. Response If exposed or concerned: Get medical advice/attention. Get medical advice/attention if you feel unwell. Storage Store in a dry place. Disposal Dispose in accordance with all applicable regulations. Hazard(s) not otherwise classified (HNOC) None known. Supplemental information None. May be a potential hazard under the following conditions: • Dust or fines are dispersed in air. • Chips, dust or fines are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Small chips, fine turnings, and dust from processing may be readily ignitable. Combustion of the coatings can generate toxic and irritating gases. Specific hazards 3. Composition/information on ingredients Complete composition is provided below and may include some components classified as non-hazardous. Composition comments Mixtures CAS number % Common name and synonyms Chemical name 7429-90-5 <80 Aluminum 7439-95-4 <6 Magnesium Various* <2.0 Resin 7439-96-5 <1.5 Manganese Various* <1.0 Colorant Not available <0.1 Adhesive * - Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. Additional Information 4. First-aid measures Dust in the eyes: Rinse eyes with plenty of water or saline for at least 15 minutes. If eye irritation persists, get medical advice/attention. Eye contact Dust from processing: Wash with soap and water for at least 15 minutes. Get medical attention if irritation develops or persists. Skin contact Dust or fume from processing: Remove to fresh air. Check for clear airway, breathing, and presence of pulse. If breathing is difficult, provide oxygen. Loosen any tight clothing on neck or chest. Provide cardiopulmonary resuscitation for persons without pulse or respirations. Get medical attention, if needed. Inhalation Not relevant, due to the form of the product. Ingestion Health effects from mechanical processing (e.g., cutting, grinding): Dust from processing: May cause eye/skin irritation. Can cause irritation of the upper respiratory tract. Additional health effects from elevated temperature processing (e.g., welding, melting): Dust and fumes from processing: Heating above the melting point releases metallic oxides which may cause metal fume fever by inhalation. The symptoms are shivering, fever, malaise and muscular pain. See Section 11 of the SDS for additional information on health hazards. Most important symptoms/effects, acute and delayed Dust from processing: Asthma, chronic lung disease, Secondary Parkinson's disease and skin rashes. Medical conditions aggravated by exposure If breathing is difficult, give oxygen. Indication of immediate medical attention and special treatment needed IF exposed or concerned: Get medical advice/attention. General information 2 / 10 Material name: REYNODUAL / REYNOBOND NC 1522 Version #: 01 Issue date: 10-29-2016 SDS US

RkJQdWJsaXNoZXIy MzAyNjY=