M-42 & M-36 Panels
Exposed Fastener PanelsPetersen provides versatile exposed fastener panels for roofs, walls, and equipment screens, including 7.2, R-36, and Corrugated options. M-42 panels are Texas-exclusive. Flashing uses PAC-CLAD materials with a 35-year warranty. Vinyl masking is advised for extra handling. M-36 and M-42 panels are unsuitable for metal buildings or structural roofs; consult Petersen for guidance.
Case Studies
PAC Metal Roofing, Wall and Trim Catalog
Single Skin Color Guide & Finishes
Documents
Features
(3'-0" on the M-42)
Overview
Petersen offers a complete line of exposed fastener panels, allowing for creative design flexibility in a cost-effective yet architecturally attractive metal panel. The versatile 7.2 panel, R-36 and 7/8” Corrugated panels can be specified for a wide range of building envelope applications including roofs, walls and linear panels. The M-36, M-42 and 1/2” Corrugated panels are suitable for wall and equipment screen projects.
NOTE: The M-42 panel is made only in the Texas facility.
Trim
All flashing and trim shall be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032 – .063 gauge as specified) or PAC-CLAD steel (24 gauge or 22 gauge as specified). A 35-year non-prorated finish warranty can be supplied covering finish performance.
Vinyl masking is recommended on all fabrication applications where extra handling is expected. Note: The strippable film must be removed immediately after installation.
Note: The M-36 and M-42 panels are not intended for use in the construction of metal buildings or structural roof applications. Please consult with Petersen regarding the application of this panel.
Materials
(M-36 Only)
Features
(3'-0" on the M-42)
Overview
Petersen offers a complete line of exposed fastener panels, allowing for creative design flexibility in a cost-effective yet architecturally attractive metal panel. The versatile 7.2 panel, R-36 and 7/8” Corrugated panels can be specified for a wide range of building envelope applications including roofs, walls and linear panels. The M-36, M-42 and 1/2” Corrugated panels are suitable for wall and equipment screen projects.
NOTE: The M-42 panel is made only in the Texas facility.
Trim
All flashing and trim shall be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032 – .063 gauge as specified) or PAC-CLAD steel (24 gauge or 22 gauge as specified). A 35-year non-prorated finish warranty can be supplied covering finish performance.
Vinyl masking is recommended on all fabrication applications where extra handling is expected. Note: The strippable film must be removed immediately after installation.
Note: The M-36 and M-42 panels are not intended for use in the construction of metal buildings or structural roof applications. Please consult with Petersen regarding the application of this panel.
(M-36 Only)
