2016 - Soffit Panels - PAC-850 - Solid

PAC-850 Soffit: Solid

Soffit Panel Systems

Features

task_altFour profiles available
task_altPerforation available for ventilation on aluminum only
task_altRoll-formed to exact lengths
task_altMatching "J" trim available
task_alt35-year non-prorated finish warranty

Features

task_altFour profiles available
task_altPerforation available for ventilation on aluminum only
task_altRoll-formed to exact lengths
task_altMatching "J" trim available
task_alt35-year non-prorated finish warranty

Profile Variations

Click a profile image to view that profile.

Petersen offers superior design versatility for soffit applications by providing the PAC-750/850 Soffit panels, as well as the Flush panel in a variety of gauges and widths. Both pre-formed profiles are effective solutions in soffit projects, and with the aluminum substrate can be ventilated for increased airflow capacity.

PAC-750 Soffit Panels
Petersen offers a pre-formed soffit panel suitable for both commercial and residential use. These panels are roll-formed from .032 aluminum. Panels are 12” wide with a “vee” groove every 6” center-to-center and furnished in continuous lengths of up to 25’. Minimum panel length is 24”.

PAC-850 Soffit Panels
PAC-850 Soffit panels utilize an innovative hook-and-grab interlock. These panels are roll-formed from .032 aluminum. Panels are 12” wide  with a “vee” groove every 6” center-to-center and furnished in continuous lengths of up to 25’. Minimum panel length is 24”.

Soffit Venting
The PAC-750 and PAC-850 Soffit panels can be lanced to allow for airflow and under-eave ventilation. Both PAC-750 and PAC-850 are available fully vented, half vented or solid.

Soffit “J” Channel
Petersen can provide soffit “J” Channel as trim to match any of its soffit panels. “J” Channel is available in lengths up to 12’ in matching colors.

PAC-850 Soffit
zoom_in
layers43 stocked colors (.032 aluminum)

Petersen offers superior design versatility for soffit applications by providing the PAC-750/850 Soffit panels, as well as the Flush panel in a variety of gauges and widths. Both pre-formed profiles are effective solutions in soffit projects, and with the aluminum substrate can be ventilated for increased airflow capacity.

PAC-750 Soffit Panels
Petersen offers a pre-formed soffit panel suitable for both commercial and residential use. These panels are roll-formed from .032 aluminum. Panels are 12” wide with a “vee” groove every 6” center-to-center and furnished in continuous lengths of up to 25’. Minimum panel length is 24”.

PAC-850 Soffit Panels
PAC-850 Soffit panels utilize an innovative hook-and-grab interlock. These panels are roll-formed from .032 aluminum. Panels are 12” wide  with a “vee” groove every 6” center-to-center and furnished in continuous lengths of up to 25’. Minimum panel length is 24”.

Soffit Venting
The PAC-750 and PAC-850 Soffit panels can be lanced to allow for airflow and under-eave ventilation. Both PAC-750 and PAC-850 are available fully vented, half vented or solid.

Soffit “J” Channel
Petersen can provide soffit “J” Channel as trim to match any of its soffit panels. “J” Channel is available in lengths up to 12’ in matching colors.

PAC-850 Soffit
zoom_in

layers43 stocked colors (.032 aluminum)
close
close