Georgia State University

 -  -  -  -  -

Approximately 1,500 square feet of Petersen’s new horizontal wall panels were utilized as an important design element on the Georgia State University Piedmont North dining hall addition on the Atlanta campus.  The 16” concealed fastener panels were finished in PAC-CLAD® Kynar 500® Sandstone finish color.

 

The 325-seat dining hall provides “fine food in a fun atmosphere” according to Lenore Musick, food services manager.  The 9,000 square foot addition is linked to a mid-rise residence hall and also provides space for activities and special events.

 

Design for the project was provided by Richard Wittschiebe Hand Architects, Atlanta.  The tight building site required “a complicated interface of elements” according to Martha Henderson-Bennett, senior project manager.  “The horizontal wall panels offered a nice low-level counterpoint to the vertical structure behind the dining hall addition.  The metal panels were selected for their durability and low maintenance.  We wanted to put them up and know they would last,” Henderson-Bennett said.

 

The Petersen panels interface with painted fiber cement board and translucent glass.

 

Installation of the Petersen panels was done by Bristol Engineered Metals, Duluth, GA.  “This was one of the first uses of Petersen’s new horizontal corrugated concealed fastener product,” according to Keith Jansen, president.  “The panels went up as expected and performed well.  The end laps nested nicely.  It was a pretty straight-forward job and turned out really well.  There were no problems at all.”

 

Petersen’s new horizontal wall panels are available in two profiles—concealed fastener flange and a concealed clip version for longer lengths—and are designed to provide superior wind-uplift resistance and outstanding aesthetics for wall and siding applications.  The panels are available in 12” and 16” widths.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-TITE Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels