Ponce Inlet

 -  -  -

Located just two blocks from the beach, the new Ponce Inlet, FL town hall and police station utilizes approximately 25,000 sq. ft. of .032” aluminum SNAP-CLAD™ metal roofing panels finished in Cool Color Hemlock Green.  In addition, 8,000 sq. ft. of PAC-CLAD aluminum flat stock was used for coping.

Design for the project was provided by Woodroffe Corporation Architects, Tampa.  The roofing contractor was Architectural Sheet Metal, Orlando.

Given the building’s proximity to the ocean, the aluminum panel material was critical in order to provide corrosion resistance.  The project is unique in that there was very little disturbance of the site during construction and incorporates a large native plant courtyard on the east elevation.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels