- Available in up to 12"-0" lengths
- Available with enhanced FACTORY MUTUAL Ratings up to FM I-I80
- FM Rated for .063 and .050 aluminum, 22 ga. and 24 ga. steel
- For longer lengths, consult factory
- Galvalume Plus available
- ANSI/SPRI ES-1 Approved
- Available in Kynar 500 painted and anodized finishes
- 37 stocked colors (24 ga. steel)
- 13 stocked colors (22 ga. steel)
- 36 stocked colors (.032 aluminum)
- 18 stocked colors (.040 aluminum)
- 28 stocked colors (.050 aluminum)
- 6 stocked colors (.063 aluminum)
- Galvalume Plus available
The innovative design of the PAC-CLAD Continuous Cleat Coping permits the installation of a sloped coping cap over extra wide walls. The support of the cleat substantially reduces sagging, which can induce ponding and the possibility of leaks. For further weather tightness, neoprene strips are factory applied to each hold down cleat (see illustration).
Factory-supplied fasteners accompany each coping order to assure proper attachment of the cleats to the wood nailer. Field-crimping on the inside leg of the coping to the inside hold down cleat completes the installation.
Wind Uplift
|
Material |
Wall Width |
FM I-90 |
FM I-105 |
FM I-120 |
FM I-165 |
FM I-180 |
|
24 ga. Steel |
16″ Max |
• |
||||
|
22 ga. Steel |
16″ Max |
• |
• |
|||
|
22 ga. Steel |
15″ Max |
• |
• |
|||
|
.050, .063 Alum. |
24″ Max |
• |
• |
|||
|
.050, .063 Alum. |
16″ Max |
• |
• |
• |
• |
|
|
.050, .063 Alum. |
15″ Max |
• |
• |
• |
• |
• |
