El Dorado Market Place


The new El Dorado Market Place in Frisco, TX is a 400,000 sq. ft. shopping center designed to meet the city’s standards for lasting elements and durability.


More than 31,000 sq. ft. of PAC-CLAD material was used in roof and façade applications including 12,375 sq. ft. of 24 gauge 16” Snap-Clad Panels; 1,260 sq. ft. of 24 gauge 16” Tite Loc Panels used exclusively for curved applications; 5,373 sq. ft. of 24 gauge 11” Flush Panels; and 12,400 sq. ft. of 24 gauge Flat Sheet.  All material was finished in Weathered Zinc.


Design for the project was provided by O’Brien & Associates, Dallas.  “Frisco has very rigid design criteria for all new construction and wants designs that include lasting elements that are built for durability,” according to David Culbertson, project architect.  “We always like to use metal for pitched roofs, awnings and canopies.  And we think metal gives somewhat of a ‘country look’ which was important in this rural area.”


The El Dorado Market Place buildings are mainly concrete tilt wall construction with brick and stone applied as veneer over concrete walls.  In some places, the concrete walls were left exposed and painted with an acrylic textured coating.


“The weather in north Texas can be harsh,” Culbertson said.  “The Petersen roof is durable and stands up well to the weather. We like it.”


Installation was done by BRI Roofing & Sheet Metal, Haslet, TX.  The general contractor on the project was Lee Lewis Construction, Dallas.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels