Palmer Bank

 -  -  -  -

Located on a high-traffic, signature intersection in Taylorville, IL, Palmer Bank sought a timeless design that would visually represent its strength and stability to the community.


Approximately 12,000 sq. ft. of 24 gauge, 16” Petersen Snap-Clad panels and 2,200 sq. ft. of PAC-850 Soffit Panels were utilized to meet the design objectives.  The Snap-Clad panels were finished in Charcoal and the .032 PAC-850 Panels were finished in Slate Gray.


Design for the design/build project was provided by The Redmond Company,Waukasha,WI.  The design team blended extensive detailing and profiling of the metal roof with a masonry façade to create an attractive prairie style look.


“We clearly wanted to take advantage of the great location with a strong, timeless design,” said Andy Young,Redmond’s director of project development and construction manager on the project.  “We presented two options to the bank regarding the roof—one being a standard three dimensional shingle roof and the other being a standing seam metal roof.  It was pretty unanimous that everyone liked the standing seam profile look.  We also liked the life cycle cost of the Petersen roof since the bank plans to be the owner of this building for the long term.”


Installation of the Petersen roof was done by E.L. Pruitt Company, Springfield,IL.  “The greatest challenge was the panel layout,” according to Dallas Stephenson, project manager.  “But the Petersen product is easy to work with.  We custom fabricated all of the flashing components in our shop and the job turned out great.


“We knew the many hips and valleys would be somewhat of an installation challenge,” Young said, “but the installer did a terrific job.”

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels