USC Science & Technology Building

 -  -  -  -  -

The new Science & Technology Building at the University of South Carolina’s New River Campus in Bluffton, SC, is one of three new buildings on the campus with Petersen roofs. 

More than 30,000 sq. ft. of PAC-CLAD .032 aluminum Tite-Loc Plus Metal Roofing Panels and Flush Panel soffit material finished in Silver Metallic were utilized on the building.  Tite-Loc Plus Panels combine an attractive thin-rib profile with superior structural performance.

The building was designed by Watson Tate Savory Architects, Columbia, SC.  According to Michael Watson, principal, “We selected aluminum because of the campus’ coastal location.  Aluminum is clearly the material of choice for that environment.  And we specified the Tite-Loc Plus Panels because of the high wind load requirements.  The building has performed well and looks great, too.”

The roofing contractor on the project was Custom Roofing and Painting Company, Columbia, SC.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels