Metal Roofing Panels

PAC-CLAD is ideally suited for application in metal roofing, curtainwall, storefront and trim applications. PAC-CLAD is an industry leading coating for  prefinished sheet metal. It is applied to both G-90 galvanized steel and 3105-H14 aluminum. Originally developed for use in abrasive environments.

PAC-CLAD architectural panels for metal roofing systems are produced in factory formed lengths of up to 55 feet.  They are also available in longer lengths. The PAC-CLAD® Kynar 500® finish, covered by a non-prorated 20 year warranty, is available in 38 colors on steel and aluminum. Most colors meet LEED®, ENERGY STAR® and cool roof certification requirements. Selected profiles can special ordered from 16 oz. copper.

The popular TITE-LOC metal roofing panel is designed for a roof pitch of 1/2:12 or greater.  The SNAP-CLAD metal roofing panel is designed for applications as low as 2:12 pitch.  Integral roofing panels, Redi-Roof panels and Snap-On metal roofing panels have been designed for a minimum 3:12 pitch.  Greater roof pitch may be required in snow country and in areas of extreme climate conditions. (See metal roofing snow guards for more information.)

Our professional roofing staff  can provide technical roofing system assistance.  Local service is provided by our nationwide organization of architectural representatives. Petersen Aluminum is prepared to offer assistance in metal roofing material selection, finish specification, and budgeting. We encourage your inquiries.

Purchase PAC-CLAD metal roofing systems nationwide. They are stocked in standard colors for shipment within 72 hours. Please allow additional time for special finishes that require color matching and approvals.

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
Edge-Loc Panel
Colorguard™ Snow Guards
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Flat and Coil Stock
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Acrylic Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Coping
PAC Anchor-Tite Coping
PAC-Continuous Cleat Coping
PAC Precision Series
Composite Wall Panels
Flush/Reveal Wall Panels