PAC-Tite WT Fascia - BUM

Features

task_altSuperior, efficient design for ease of installation
task_altExtensively tested for reliable, long-term performance
task_altWelded corners and scuppers available (for aluminum products only)
task_altWide variety of colors and finishes
task_altPre-punched, slotted holes for precise fastener placement
task_altNon-penetrating design maintains watertightness integrity
task_altReusable and recyclable material
task_altCustom and radius capabilities available

Features

task_altSuperior, efficient design for ease of installation
task_altExtensively tested for reliable, long-term performance
task_altWelded corners and scuppers available (for aluminum products only)
task_altWide variety of colors and finishes
task_altPre-punched, slotted holes for precise fastener placement
task_altNon-penetrating design maintains watertightness integrity
task_altReusable and recyclable material
task_altCustom and radius capabilities available

Profile Variations

Click a profile image to view that profile.

The PAC-TITE line of roof edge systems provide unmatched uplift protection for single-ply and built up/modified roof systems. Combining superior strength and aesthetics with ease of installation, PAC-TITE fascias offer the ideal solution in a wide variety of roof edge applications.

PAC-TITE WT Fascia has been specifically designed to meet architectural and industry demands to allow for the smaller face height in heavier gauge covers, such as .050 and .063 aluminum.

A non-penetrating design eliminates the need for stripping in and heat welding, maintaining the watertight integrity of the installation. PAC-TITE WT Fascia features an extruded aluminum anchor bar to securely terminate the membrane. The bar is readily available to dry-in the roof structure for added installation flexibility.

Two Versions Available

Both versions of PAC-TITE WT Fascia are available and have been extensively tested to meet ANSI-SPRI ES-1 Standard to comply with the International Building Code:

  • Fully Adhered/Mechanically Attached Single-Ply (FA)
  • Built-Up/Modified (BUM)

Additionally, PAC-TITE WT Fascia is backed by a Lifetime 215 mph wind warranty to ensure long-term, worry-free performance.

PAC-TITE WT Fascia features pre-punched holes which not only provide quicker installation for labor savings, but are slotted to allow for thermal movement for guaranteed long-term performance. Interlocking, concealed splice plates prevent splice plate migration for a more architecturally pleasing finish. Competitively priced, PAC-TITE WT Fascia’s installed cost can be as economical as local fabrication while ensuring specification details are met.

Offering a wide range of factory-fabricated accessories such as miters, scuppers and drainage components, Petersen provides the complete system to ensure a clean, sure-fitting product while eliminating the need for field fabrication.

WT Fascia BUM
zoom_in
layers15 Stocked PAC-CLAD finishes (22 gauge steel)
layers29 Stocked PAC-CLAD Finishes (.050 aluminum)
layers)6 Stocked PAC-CLAD Finishes (.063 aluminum)
layersMill Finish Aluminum (.050 & .063 aluminum)
layersClear and Colored Anodized (.050 & .063 aluminum)

The PAC-TITE line of roof edge systems provide unmatched uplift protection for single-ply and built up/modified roof systems. Combining superior strength and aesthetics with ease of installation, PAC-TITE fascias offer the ideal solution in a wide variety of roof edge applications.

PAC-TITE WT Fascia has been specifically designed to meet architectural and industry demands to allow for the smaller face height in heavier gauge covers, such as .050 and .063 aluminum.

A non-penetrating design eliminates the need for stripping in and heat welding, maintaining the watertight integrity of the installation. PAC-TITE WT Fascia features an extruded aluminum anchor bar to securely terminate the membrane. The bar is readily available to dry-in the roof structure for added installation flexibility.

Two Versions Available

Both versions of PAC-TITE WT Fascia are available and have been extensively tested to meet ANSI-SPRI ES-1 Standard to comply with the International Building Code:

  • Fully Adhered/Mechanically Attached Single-Ply (FA)
  • Built-Up/Modified (BUM)

Additionally, PAC-TITE WT Fascia is backed by a Lifetime 215 mph wind warranty to ensure long-term, worry-free performance.

PAC-TITE WT Fascia features pre-punched holes which not only provide quicker installation for labor savings, but are slotted to allow for thermal movement for guaranteed long-term performance. Interlocking, concealed splice plates prevent splice plate migration for a more architecturally pleasing finish. Competitively priced, PAC-TITE WT Fascia’s installed cost can be as economical as local fabrication while ensuring specification details are met.

Offering a wide range of factory-fabricated accessories such as miters, scuppers and drainage components, Petersen provides the complete system to ensure a clean, sure-fitting product while eliminating the need for field fabrication.

WT Fascia BUM
zoom_in

layers15 Stocked PAC-CLAD finishes (22 gauge steel)
layers29 Stocked PAC-CLAD Finishes (.050 aluminum)
layers)6 Stocked PAC-CLAD Finishes (.063 aluminum)
layersMill Finish Aluminum (.050 & .063 aluminum)
layersClear and Colored Anodized (.050 & .063 aluminum)
arrow_back_ios Back
close
close
close