PAC-Tite WT Canted Fascia

PAC-TITE WT Canted Fascia

PAC-TITE WT Canted Fascia

PAC-Tite WT Canted Fascia

The PAC-TITE line of roof edge systems provides unmatched uplift protection for single-ply and built up/modified roof systems. Combining superior strength and aesthetics with ease of installation, PAC-TITE fascias offer the ideal solution in a wide variety of roof edge applications.

PAC-TITE WT Canted Fascia with Galvanized Waterdam features a unique design that keeps the flange out of the waterline. It is available in two profiles, both in .050 and .063 aluminum fascia covers: The standard Canted Fascia version is available in a 5 1/2″ face. The PAC-TITE WT Extended Canted Fascia profile is offered in 9″ to 13 1/2″ face heights to accommodate multiple nailers without the need for a fascia extender.

A non-penetrating design eliminates the need for stripping in and heat welding. The fascia features an extruded aluminum anchor bar to securely terminate the membrane, and is readily available for quick shipment to dry-in the roof structure for added installation flexibility.

Two Versions Available

Both versions of PAC-TITE WT Canted Fascia have been extensively tested to meet ANSI-SPRI ES-1, FM 1-270 Approvals and Miami-Dade:

  • WT Canted Fascia with Galvanized Waterdam
  • WT Extended Canted Fascia with Galvanized Waterdam

Additionally, PAC-TITE WT Canted Fascia is backed by a Lifetime 215 mph wind warranty to ensure long-term, worry-free performance.

PAC-TITE WT Canted Fascia features pre-punched holes which not only provides quicker installation for labor savings, but are slotted to allow for thermal movement for guaranteed long-term performance. Interlocking, concealed splice plates prevent splice plate migration for a more architecturally pleasing finish.

Offering a wide range of factory-fabricated accessories such as miters, scuppers and drainage components, Petersen provides the complete system to ensure a clean, sure-fitting product while eliminating the need for field fabrication.

  • 15 stocked PAC-CLAD finishes (22 gauge steel)
  • 29 Stocked PAC-CLAD Finishes (.050 aluminum)
  • 6 Stocked PAC-CLAD Finishes (.063 aluminum)
  • Mill Finish Aluminum (050 & .063 aluminum)
  • Clear and Colored Anodized (.050 & .063 aluminum)
  • ANSI/SPRI/FM 4435/ES-1 Standard to a design pressure of 190 lbs/ft2 to comply with the International Building Code
  •  Factory Mutual 1-270 approved
  •  Miami-Dade Approved – High Velocity Hurricane Zone

A Lifetime 170 mph warranty is available. It covers replacement or repair of any portion of the roof edge system that has failed due to a defect in the supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.

Face Heights

PAC Literature