PAC-850 Soffit

PAC-850 Soffit
PAC-850 Soffit Half Vent
PAC-850 Soffit Full Vent

PAC-850 Soffit

PAC-850 Soffit

PAC-850 Soffit
PAC-850 Soffit Half Vent
PAC-850 Soffit Full Vent
  • Four profiles available
  • Perforation available for ventilation on aluminum only
  • Roll-formed to exact lengths
  • Matching "J" trim available
  • Flush panels now available with venting
  • 30-year non-prorated finish warranty

PAC-CLAD offers superior design versatility for soffit applications by providing the PAC-750/850 Soffit Panels. Both pre-formed profiles are effective solutions in soffit projects and can be ventilated for increased air flow capacity.


PAC-850 Soffit Panels

Petersen Aluminum PAC-850 Soffit Panels utilize an innovative hook and grab interlock. These panels are roll-formed of .032 aluminum. Panels are 12″ wide with a “vee” groove every 6″ center-to-center and furnished in continuous lengths of up to 25 feet. Minimum panel length is 20″. Steel is not available in this profile.


Soffit Venting

The PAC-750 and PAC-850 Soffit Panels can be perforated to allow for air flow and under eave ventilation. Both PAC-750 and PAC-850 are available fully vented, half vented, or solid. See illustrations as an example.


Soffit “J” Channel

Petersen Aluminum can provide Soffit “J” Channel as trim to match any of our soffit panels. “J” Channel is available in lengths up to 12 feet in matching colors.


  • 38 stocked colors (.032 aluminum)
Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Composite Wall Panels
Precision Series Wall Panels
Flush/Reveal Wall Panels