Firecreek Restaurant

 -  -  -  -

Built originally as a saw mill and converted to a paper mill in 1881, the Brandywine Paperboard Mill had stood abandoned and dilapidated for years.  Located on the banks of the Brandywine River in Downingtown, PA, the mill has been transformed into the upscale Firecreek Restaurant.

Approximately 3,700 sq. ft. of PAC-CLAD 24 gauge Galvalume Plus High Snap-On Metal Roofing Panels and 2,200 sq. ft. of 16 oz. Copper, 1/2” Corrugated Panels helped complete the transformation.

“This was Phase 1 of a major urban infill project,” according to owner Tom Deignan.  Deignan is also president of Carroll Contractors, the general contractor on the design/build project.  “Phase 2 will be an office building and Phase 3 will be a 65 unit condo complex.”

The project required rezoning and is now classified as an ARM District (Adaptive Reuse of Mills).  “We tried to replicate materials as closely as possible to the original although there was probably a wood roof of some sort on the original structure.  What we create from an architectural perspective will coincide with the vernacular architecture of antiquated mills, albeit new construction,” Deignan said.

Installation of the PAC-CLAD material was done by Munn Roofing Corp., Chalfont, PA.  “The greatest challenge resulted from the low slope areas that required some old-fashioned flashing techniques,” said Sam Munn.  “We used several experienced ‘tin-knockers’ who did a great job.  And it was also tricky tying the copper into the stone work–getting it to fit the line of the old stones.  But the job turned out great.”

Snap-Clad Panel
Tite-Loc Panel
Tite-Loc Plus Panel
Tite-Loc HS Panel
Snap-On Standing Seam Panel
High Snap-On Standing Seam Panel
Snap-On Batten Panel
Redi-Roof Standing Seam Panel
Redi-Roof Batten Panel
Integral Standing Seam Panel
Integral Batten Panel
ColorGard® Snow Retention System
PAC-150 90° Single Lock
PAC-150 180° Double Lock
M-42 & M-36 Panels
7.2 Panel
1/2″ & 7/8″ Corrugated Panel
R-41 & R-36 Panels
Coil and Flat Sheet
Flashing and Trim
Custom Fabrication
Anodized Aluminum
Copper & Stainless Steel
PAC-750 Soffit
PAC-850 Soffit
Flush/Reveal Soffit
PAC-1000F Column Cover
PAC-1000C Column Cover
PAC-1000R Column Cover
PAC-2000F Column Cover
PAC-2000C Column Cover
PAC-2000R Column Cover
PAC SS Vented Eave & Intake Vent
PAC ECO Vented Fascia
PAC SS Rake Panel & Fascia
PAC SS Ridge Vents
PAC-TITE Angular Fascia
PAC-TITE WT Canted Fascia
PAC-TITE WT Extended Fascia
PAC-LOC Fascia
PAC Snap Edge Fascia
PAC Extended Snap Edge Fascia
PAC-TITE Gold Coping
PAC-Continuous Cleat Coping
Precision Series Wall Panels
Composite Wall Panels
Flush/Reveal Wall Panels