Soffit Panel Systems

PAC-CLAD offers superior design versatility for metal roofing soffit applications. Our pre-formed profiles are effective solutions in soffit projects and can be ventilated for increased air flow capacity and are suitable for both commercial and residential soffit use.

The popular Petersen Aluminum PAC-850 Soffit Panels utilize an innovative hook and grab interlock. These panels are roll-formed of .032 aluminum. Panels are 12″ wide with a “vee” groove every 6″ center-to-center and furnished in continuous lengths of up to 25 feet. Minimum panel length is 24″.

Petersen Aluminum can provide Soffit “J” Channel as trim to match any of its soffit panels. “J” Channel is available in lengths up to 12 feet in matching colors.

PAC-CLAD Flush Panels are designed for wall, fascia and soffit applications where a flush or flat appearance is desired. A rounded interlock leg and concealed fastening system improves the flush appearance while providing additional strength. Panels are factory-formed to length to minimize field cutting. PAC-CLAD Flush Panels are intended for use in vertical wall, fascia and soffit applications.

Petersen Flush Panels are formed on precision roll-forming equipment that includes in-line Herr-Voss corrective levelers. Corrective leveling works to remove typical metal conditions including coil set, crowning and edge wave. In-line leveling capabilities allow us to work with source material that is “still-water” flat. The result is a panel that exhibits superior flatness.

close
close