ANSI/SPRI GT-1 Tested to Comply with International Building Code
FM Approved for Wind Uplift Protection
Pre-Punched Holes and No External Brackets=Less Installation Time
Prefabricated Miters and Accessories Eliminate Need for Field Fabrication
Variety of Colors, Sizes & Materials
Superior, Tested, Attractive Roof Drainage Prefabricated PAC-TITE WR Gutters are specifically engineered and tested to meet the requirements of the ANSI/SPRI GT-1 Standard for Gutter Systems Used with Low-Slope Roofs. The design incorporates a extruded internal gutter hanger for strength and support. It also reduces the torque of the metal with expansion and contraction in temperature changes.
Efficient Design
Extruded aluminum internal brackets securely support large volumes of water, as well as extreme snow and ice conditions. No external brackets or wind straps required.
Adapts easily to optional drainage bars or flow through gravel stops.
Pre-punched slots eliminate the need for drilling and ensures proper fastener placement while allowing for thermal expansion and contraction of the gutter system.
Provided in 12’-0” lengths for quicker installation and lower labor costs.
Concealed splice plates and fasteners are included.
Sizes (Front / Bottom / Back)
5.25” / 5.25” / 6.25”
5.75” / 5.75” / 6.75”
6.25” / 6.25” / 7.25”
6.75” / 6.75” / 7.75”
7.25” / 7.25” / 8.25”
7.75” / 7.75” / 8.75”
NOTE: FM Approved Design has an alternative bracket configuration.
24 ga. steel
22 ga. steel
.040” aluminum
.050” aluminum
.063” aluminum
PAC Metal Roofing, Wall and Trim Catalog
Our comprehensive 52-page catalog contains detailed information on PAC’s full line of metal roofing, wall panels, corrugated panels, coping, gravel stops, column covers, snow guards and trim.
Our metal wall and roofing colors feature Kynar-based 70% PVDF coatings formulated to resist sun and weather damage. PAC-CLAD standard, metallic, cool, and premium colors are shown on this chart along with availability.
