PAC-Shield

PAC-Shield is a rigid roof insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to fiber reinforced facers on each side (GRF). Approved for direct application to steel decks. Approved under all major roof covering systems – BUR, Modified and Single-Ply.

Applications

• Standing Seam Metal Roof Systems
• Constructions requiring FM Class 1 and UL Class A ratings
• Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)
• Modified Bitumen Systems
• Built-Up Roofing: Asphalt and Coal Tar
• To achieve optimal thermal performance, PAC-CLAD recommends installation of a multilayer system with staggered joints

Panel Characteristics

• Manufactured with NexGen Chemistry: Contains no CFCs, HFC, HCFCs, is Zero ODP, EPA Complaint, and has virtually no GWP
• Available in two grades of compressive strengths per ASTM C 1289 Type II, Class 1 Grade 2 (20 psi) or Grade 3 (25 psi)
• Available in 4’x4’ (1220mm x 1220mm) and 4’x8’ (1220mm x 2440mm) panels in thicknesses of 1” (25mm) to 4.5” (114mm)
• Also available as special cut products – straight cut, bevel cut, and flute fill

Potential Leed® Credits For Polyiso Use

• Energy and Atmosphere
  • Optimize Energy Performance
• Materials & Resources
  • Building Life-Cycle Impact Reduction
  • Environment Product Declaration
  • Material Reuse
  • Recycled Content
  • Construction and Demolition Waste Management
• Indoor Environmental Quality
  • Thermal Comfort